Disclosure: As an Amazon Associate we earn from qualifying purchases at no extra cost to you.

Please note: Product availability and information are based on our research at time of writing and are subject to change. Always check Amazon for the latest details before purchasing. Reviews remain editorially independent.

If one part of your house stays cold while the rest heats up, the zone valve is one thing to check. If youโ€™ve narrowed the problem down to the valve, take a photo of the labels on the valve body and power head before you shop. The model number is a better starting point than how the valve looks.

Do you need the whole valve?

The power head is the part that moves the valve when the thermostat calls for heat. The valve body is the part connected to the pipe. If the head has failed and the body is still sound, ask your heating technician whether a matching replacement head is available. The Taco 555-050RP, for example, is sold as a replacement head. The five picks below are listed as complete valves.

Five zone valves at a glance

Wide table: this table is wider than the page on small screens โ€” swipe or scroll it sideways to see every column โ†’

Model Why itโ€™s on the list What to check Buying link
Honeywell V8043F1036 A direct starting point when the old label reads V8043F1036 ยพ-inch sweat connection, screw terminals and end switch View on Amazon
Taco T571-2 Gold Series A familiar replacement candidate for an existing Taco 571 Full model number and ยพ-inch connection View on Amazon
WIRELEL V8043E1012-compatible valve An aftermarket option for shoppers matching a V8043E-series valve Exact model fit, wire leads and whatโ€™s included View on Amazon
White-Rodgers 1311-102 A model-specific option for an existing White-Rodgers setup Pipe size and control connections View on Amazon
Taco Zone Sentry Z075C2-1 A Zone Sentry option with a ยพ-inch sweat connection Exact suffix, 24 V controls and normally closed operation View on Amazon

The Five Valves

 

1. Honeywell V8043F1036

Worth a look if your old valve has this exact model number. The listing gives you three useful details to match before ordering: a ยพ-inch sweat connection, screw terminals and an end switch. If your old label ends in different digits, check the replacement against that number. Similar-looking Honeywell valves can have different connections.

Buying note: the listing is for a single valve and its details table has some unrelated entries, so go by the model number V8043F1036 and the three details above.

Honeywell

Honeywell V8043F1036 Zone Valve, 3/4 in Sweat, Screw Terminals and End Switch

Best for: Replacing a valve whose label reads V8043F1036

Honeywell's V8043F1036 is a two-way, normally closed, 24 V zone valve with a 3/4 in sweat connection, an end switch and a screw terminal block, per Honeywell's V8043 catalog.


Pros and Cons ▾ tap to expand

2. Taco T571-2 Gold Series

Start here if youโ€™re replacing a Taco 571. The listing identifies it as the ยพ-inch Gold Series valve. Compare the full number on the old unit before ordering. If your technician finds that the head is the only failed part, ask about the matching replacement head first.

Buying note: the listing title shows T571-2, but its details show 571-3. Confirm which model ships, and match the full number on your old valve.

Taco

Taco T571-2 Gold Series Zone Valve, 3/4 in Sweat

Best for: Replacing an existing Taco 571

A 3/4 in sweat, two-way Taco Gold Series heat motor zone valve.


Pros and Cons ▾ tap to expand

3. WIRELEL V8043E1012-compatible valve

An aftermarket option worth checking if your old valve is a V8043E1012. The listing describes a normally closed 24 V valve with wire leads and an end switch. Check the exact model on your old valve and look at the listing photos to make sure the body and head are both included. If youโ€™re matching a different V8043E suffix, confirm that fit before buying.

Buying note: the brand on the listing is WIRELEL, not Honeywell. It is sold as a compatible aftermarket valve, and the listing says the full valve unit (power head and brass body) is included. Go by the V8043E1012 and ยพ-inch sweat details.

WIRELEL

WIRELEL V8043E1012-Compatible Zone Valve, 3/4 in Sweat

Best for: Matching an existing V8043E1012 with an aftermarket valve

An aftermarket 3/4 in sweat zone valve sold under the WIRELEL brand and described as compatible with the Honeywell V8043E1012.


Pros and Cons ▾ tap to expand

4. White-Rodgers 1311-102

Worth checking if you already have a White-Rodgers 1311-102. Youโ€™ll see similar numbers in the search results, including the 1361-102. Read the whole label and confirm the pipe connection and control setup before choosing a replacement. This pick is most useful when you have a clear model match.

Buying note: White-Rodgers’ own spec lists the 1311-102 as a three-wire, 24 V valve for ยพ-inch tubing, and shows the 1361 series as two-wire, so count the wires on your old valve.

White-Rodgers

White-Rodgers 1311-102 Hydronic Zone Valve, 3/4 in, 3-Wire

Best for: Replacing an existing White-Rodgers 1311-102

A three-wire, 24 V hydronic zone valve for 3/4 in tubing, per the White-Rodgers 1300 series sheet, with screw terminals, an auxiliary switch and a 50 psi maximum system pressure.


Pros and Cons ▾ tap to expand

5. Taco Zone Sentry Z075C2-1

A good starting point if youโ€™re matching this particular Zone Sentry. The listing identifies a normally closed, two-way, 24 V valve with a ยพ-inch sweat connection. Pay attention to the -1 suffix and the connection description when you order, especially if Amazon shows several versions together.

Buying note: match the suffix printed on your old valve. The Taco sheet we read covers the Z075C2 family and does not explain the -1 suffix.

Taco

Taco Zone Sentry Z075C2-1 Zone Valve, 3/4 in Sweat, 24 V

Best for: Matching an existing Zone Sentry Z075C2-1

A normally closed, two-way, 24 V Taco Zone Sentry zone valve with a 3/4 in sweat connection.


Pros and Cons ▾ tap to expand

What to match before you order

  • Model number and suffix. Photograph both labels so you can compare them with the listing.
  • Pipe size and connection. Check the size and whether the valve uses a soldered, threaded or press connection.
  • Controls. Ask your technician to confirm the voltage, whether the valve is normally open or normally closed, and whether your system needs an end switch.
  • Box contents. Read the title and look at the photos. A search for the valve model can also turn up power heads and motors sold separately.

If a room still wonโ€™t heat and you havenโ€™t pinned down the fault, have the system checked before ordering a part. If youโ€™re also comparing pumps for the same system, see our hydronic circulator pump roundup.

Need a Professional Plumber?

Sometimes a job is too big for DIY. To find local plumbers, you can search PlumberArchive.com, a plumber directory.

Search PlumberArchive.com โ†’

Sources

Documents and Amazon listings read on 16 November 2026. Listing details are used only where attributed to the listing.

โœ๏ธ About This Review

PTR Editorial Team โ€” Product Reviews. We compare manufacturer specifications, installation requirements, compatibility and available product documentation to help homeowners choose suitable tools and parts. How we review โ†’